Air Wing Rack LED Light Kit

    Part Number 68000113


    Finish / Color: Smoked Lens




    A A A

    Custom fit to the Air Wing Tour-Pak® Rack, this fast acting LED Light Kit operates as a supplemental rear running light and brake light.

    • Fast-acting LED Light Kit operates as a supplemental rear running light and brake light
    • High, center-mount position places the light in the line of sight of following vehicles
    • Bright, fast-acting red LED lamps get you noticed
    • Wiring is concealed inside the rack tubes for a clean, custom installation
    • Smoked lens


    • Lighting Type

    • Lighting Color

    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      LED light assembly, all necessary mounting hardware and installation instructions


    A A A

    Fits '14-later Touring and Tri Glide™ models equipped with Air Wing Tour-Pak® Luggage Rack P/N 79179-08 or 53000063. Also fits '14-later FLHTKSE and '15-later FLTRUSE models with Original Equipment Tour-Pak® Rack.

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model


    Air Wing Rack LED Light Kit is rated 3.8 out of 5 by 8.
    Rated 5 out of 5 by from Air Wing Rack LED Light Kit Not only does it add a lot of class and style to my bike it really lights up at eye level for people in cages to see it much easier. Does a great job!
    Date published: 2016-11-27
    Rated 5 out of 5 by from Nice LED Light. Added this to my air wing luggage rack. I think it looks great, you can't have to many lights. My ole lady said Installation was a piece of cake.
    Date published: 2016-06-01
    Rated 3 out of 5 by from So-so After buying this product, I wish I hadn't because it really doesn't add enough light to be considered a safety enhancement, at least as far as I'm concerned. During the day, it really can't be seen at all especially the way it is angled.
    Date published: 2016-05-03
    Rated 4 out of 5 by from NIce light I purchased this light to add to my CVO Limited. It complimented the lighting well, installation was not as simple as I thought it would be, but it can be easily done by anyone with some mechanical ability. The instructions on the wire routing could be better, maybe with a little color to differentiate new wfrom excisting wires.
    Date published: 2015-11-12
    • y_2018, m_2, d_26, h_20
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_8
    • loc_en_US, sid_PA-11-68000113, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Q & A

    No pigtail for the air wing light for freewheeler

    When will you have a wire harness for the air wing rack for the Freewheeler? I am not happy you don't have a harness and this is not good for Harley or me. It would be so easy for Harley to do this. I used to build them for Cat tractor at Belcan Eng. I wont this light and have it work.
    Asked by: gtodd
    Hi Gtodd, Unfortunately, we neither have access to this information nor can we discuss future products. If you would like to see Harley-Davidson make Air Wing Rack LED Light Kit for the FLRT, the best way to get your idea heard is to: Go to > Contact Us > IDEAS FOR HARLEY-DAVIDSON MOTOR COMPANY > Idea Submission Instructions Thank you for your question.
    Answered by: FXS78
    Date published: 2015-09-03

    So this doesn't actually fit a Freewheeler ?

    After tearing everything apart I see a 6 pin connector on the product, and an 8 pin connector on the trike. Since everything has been opened and 1/2 installed I can't take it back. It's pretty easy to change a web page folks, but I can't get my time back ...
    Asked by: Cobalt95
    Hi Cobalt95, I am sorry for the confusion and frustration this mistake may have caused you. If you ordered this item from the Harley-Davidson Online Store, please give us a call, and we will process the return for you. Thank you for your question.
    Answered by: FXS78
    Date published: 2015-04-16

    Air Wing Rack LED for 2015 Freewheeler

    When I search online on this website it indicates that Part Number 68000113, does fit the 2015 Freewheeler. However the instructions only show installation into the tour pak air wing rack, which is not the rack that shows compatibility for the 2015 Freewheeler. The supplied harness will not connect to the freewheeler lighting harness as it has a six pin connector and the freewheeler has an 8 pin connector. My dealer was unable to locate an alternative harness for the freewheeler. If this part does not actually fit the Freewheeler, please update the fitment database. Or if the supplied harness does fit the freewheeler somewhere other than the 8 pin connector, please provide appropriate instructions. Or if another harness is required, please indicate that part number. Thanks!
    Asked by: cbridgeford
    Hi Cbridgeford, Unfortunately, the inclusion of the Freewheeler in the 2015 fitment list for the Air Wing Rack LED Light Kit (P/N 68000113) is inaccurate and will be corrected shortly. We apologize for any confusion this may have caused. The correct LED Light Kits that would fit the Air Wing Luggage Rack - Freewheeler Models (P/N 50300097) is P/N 68000111 (Red Lens) and P/N 68000116 (Smoked Lens). Thank you for your question.
    Answered by: FXS78
    Date published: 2015-04-01

    I am installing this light on a 2015 Freewheeler. Where is the connector for the light harness.

    The kit came with a 6 pin harness. The shop manual shows a 8 pin connector for the rear lights. Do I need something else?
    Asked by: Bobbmac66
    Hello Bobbmac66, Please contact your local dealership for further installation assistance. Thank you!
    Answered by: JD34
    Date published: 2015-03-29

    Please post the installation instructions - the link is broken

    The link to the installation instructions is broken and does not pull up. I need to complete the wiring installation and need the pin-out.
    Asked by: bufalo
    • y_2018, m_2, d_26, h_20CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_6
    • loc_en_US, sid_PA-11-68000113, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Recently Viewed

      Please Hold Your Iron Horses

      You’ve been sitting idle, so your session will expire in

      Would you like to remain signed in and continue shopping?

      Yes, keep me signed in No, sign me out
      Item(s) Were Added to Your Cart
      Checkout Now
      Continue Shopping