Bar & Shield Front LED Turn Signals

    Part Number 68411-10


    Finish / Color: Chrome




    A A A

    Beautiful signature light for models with Flat Lens turn signals. These Turn Signals feature fast acting, extra bright LED's set in a low-profile die-cast chrome housings.

    • Amber front lens
    • Installation does not require installation of a control box or load equalizer, and the turn signals attach directly to existing wiring without cutting or splicing
    • Features pillow-style optics, a horizontal chrome band, and a Bar & Shield medallion
    • Sold in pairs


    • Collection

      Bar & Shield
    • Position on Bike

    • Lighting Type

    • Lens Color

    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Left and right turn signal with all necessary mounting hardware


    A A A

    Fits '01-'17 FLSTC and '01-'13 Touring models equipped with flat lens turn signals.

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model


    Bar & Shield Front LED Turn Signals is rated 4.1 out of 5 by 12.
    Rated 2 out of 5 by from Costly These are exceptional for safety while it works. After two years I've shelled out nearly 400 bucks because they fail. Broken off capacitors on 2 and another that only half of the led fixture lights. Harley needs a sustainable retrofit to repair instead of entire fixture replacement when these go bad. I am very dissapointed with the longevity of this expensive piece of crap.
    Date published: 2017-10-01
    Rated 5 out of 5 by from 2013 Electraglide ultra limited install front LED turn signals This was an easy install. The wiring and install was easy. The piece appears to be designed for the bike. It is still working after a year and 13k miles. I thought it would be brighter during day riding. It must be since at night is really is bright as I can see on the road that it is operating.
    Date published: 2017-03-05
    Rated 2 out of 5 by from H-D Design Flaw I purchased both the front and rear LED Turn Signals on 10/2013. By July 2014 one of my rear turn signals stopped working in the middle of a 4,000 mile trip. Upon inspecting it, the big capacitor was completely loose inside of it, with both connections to the circuit board broken. The dealer in AZ tried to solder it back in place but it wouldn't work anymore. I got a replacement under warranty and it has been working fine since. Last weekend one of the front ones stopped working and after inspecting it, one of the connections on the same capacitor was broken. Tried to solder it back but no luck. Now I will try to get a warranty replacement even though it has been more than one year since purchase because it is clearly a design flaw to have such big capacitor holding its weight on two curved connections to the circuit board. You don't need a lot of vibration to have them break! So what I did on the other 3 working LED Turn Signals was to apply Electronic grade silicone around the capacitor an its two connections to the circuit board. This should prevent the capacitor connections from breaking again and hopefully it is the only design flaw. H-D should make a recall and either apply silicone or resin around that capacitor to keep customers satisfied with quite an expensive product. When they work they are very nice but for the price tag you would think they would last several years/miles.
    Date published: 2015-05-29
    Rated 3 out of 5 by from disappointing bought this product in fall of 2012. Besides being fairly challenging to install, as of spring 2015 I have had to replace these 2 1/2 times!!! ridiculous how fast these burn out. And in that time frame, I've only put on 7,000 miles. Even though these look great when working, I would NOT recommend purchase due to lack of quality.
    Date published: 2015-05-24
    • y_2018, m_2, d_26, h_20
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_12
    • loc_en_US, sid_PA-11-6841110, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Q & A

    Do these function in run mode (as running lights) as the OEM incandescents do or do they only function as turn signals / hazard signals?

    Asked by: SteelEagleRider
    Hello SteelEagleRider, In the front the they function as running lights and turn signals. Thank You!
    Answered by: JD34
    Date published: 2015-04-30

    is there a part number for the amber lens alone?

    Why are the rear indicators red and not amber as in the front?
    Asked by: rustyales
    The lenses for the B&S Front LED Turn Signals aren't sold separately, sorry. As for the rear indicator lights on a '13 FLHRC, I'm showing that they come stock with amber lenses.
    Answered by: RockyXL883
    Date published: 2014-10-16

    will these fit the rear turn signals of my 2003 Ultra Classic as on this model the front and rear are the same and I want to keep the color amber rear

    Asked by: rwolfe
    • y_2018, m_2, d_26, h_20CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_3
    • loc_en_US, sid_PA-11-6841110, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Recently Viewed

      Please Hold Your Iron Horses

      You’ve been sitting idle, so your session will expire in

      Would you like to remain signed in and continue shopping?

      Yes, keep me signed in No, sign me out
      Item(s) Were Added to Your Cart
      Checkout Now
      Continue Shopping