Satin Black Batwing Mini-Ape Handlebar

    Part Number 57485-11


    Finish / Color: Satin Black




    A A A

    Throw your fists in the air with these 12" ape hangers. A favorite among long-armed riders, these bars are shaped to rest your hands just above the top of the classic Bat Wing fairing. The bars feature a tall stance and minimal amount of pull back that help to achieve a cool yet comfortable riding profile.

    • Satin Black finish
    • Accept internal wiring for a clean look
    • See Guides tab for additional components required for installation


    • Material Content

    • Material Diameter

      1.0 Inch
    • Tip-to-Tip

      35.0 Inch
    • Base Width

      16.0 Inch
    • Knurl Center-to-Center

      3.50 Inch
    • Rise

      12.0 Inch
    • Pullback

      1.75 Inch
    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Handlebar and bushings
    • Sold Separately

      Additional installation components


    A A A

    Fits '09-later Electra Glide®, Street Glide®, Ultra Limited™ (except '10-'13 FLHTK) and Trike (except FLRT) models. Does not fit CVO™ models. All models require separate purchase of additional components for installation. '09-'13 FLHX and models with fairing-mount mirrors require separate purchase of handlebar-mounted mirrors and Fairing Plugs. Does not fit with stock heated grips or accessory Black Rubber Heated Hand Grips P/N 56100034.

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model

    More Info

    A A A


      Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.


      Batwing Mini-Ape Handlebar is rated 3.2 out of 5 by 5.
      Rated 4 out of 5 by from Great bars! I'm 5'-10 and these bars are the perfect height for me. It took a little getting used to the width, but I feel like I have better control and the comfort is much better than stock bars. Harley should just put these on a stock bars. This was the best thing I have done to my bike so far!
      Date published: 2017-07-03
      Rated 3 out of 5 by from Good height but paint and bar thickness could be better At 6'0 with a long torso, I was constantly reaching down for the stock bars and was not comfortable. These are a great height for me, my hands are just below my shoulders and the grips are right at the top of the fairing, not above. I bought aftermarket, smaller mirrors and drilled new holes lower on the fairing and look under my arms to see behind me. I prefer this cleaner look from the front and can still see behind. As for the install, you do not need cable or wire extensions. I disconnected all the wires from the cannon plug connectors, ran them through the bars and then re-routed the connectors that run to them in the fairing. Clutch and brake lines are plenty long. As for the bars, the black is painted not powder coated. So the paint chips and peels way too easy! Especially when you are trying to position the hand controls. These bars pick up a little more vibration but are not that bad. I.M.O. they need to be 1/2 thicker, this would cut down on vibration, look better and make running the wires through the bars easier.
      Date published: 2016-08-21
      Rated 4 out of 5 by from Right fit for me I'm 6'4" and it was the right fit for me. Dealer said I had to lose the heated hand grips due to cabling restrictions (hole size) through the handlebar. Reason for not scoring a 5
      Date published: 2016-06-22
      Rated 1 out of 5 by from Nor for me or my 2010 st glide Puts my wrists in a very uncomfortable position, I will replace these bars first chance I get.
      Date published: 2016-04-06
      • y_2018, m_2, d_26, h_20
      • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_5
      • loc_en_US, sid_PA-09-5748511, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Q & A

      2017 cables

      Looking to get these 12 inch mini installed but can not find out if I need to replace cables on 2017 Street Glide or if will my stock wires work.
      Asked by: Alorredwingsfan

      Will these bars fit 2016 street glide without replacement of cables and wires

      Asked by: Robbins1
      Hi Robbins1, When changing handlebars it is recommended cables and wires be replaced as well. The same goes for the Batwing Mini-Ape Handlebar--cables and wires must be changed. Thanks!
      Answered by: RowdyGrl79
      Date published: 2016-07-26

      How wide are the bars tip to tip?

      Looking to install on my 15 Road Glide Special. I don't want something too wide though. A lot that I am coming across are 37". I was looking for something that is more around 31" or 32" wide.
      Asked by: HarimauSilat
      Hi HarimauSilat, The tip to tip length of this Batwing Mini-Ape Handlebar is 35 inches. Thank you for your question.
      Answered by: FXS78
      Date published: 2016-05-11

      Do these require a cable and wiring change for a 2009 Streetglide?

      Asked by: rusburnett
      Hi Rusburnett, Yes, this Batwing Mini-Ape Handlebar does require the separate purchase of additional components for installation. Please refer to the "Bat Wing Mini-Ape Handlebar" link, under the "More Info" tab for assistance. Thank you for your question.
      Answered by: FXS78
      Date published: 2016-02-25

      2009 Electra Glide Standard. What would I need to make these work on my bike. Also do they make these in a 10"?

      What options do I have without adding cables and wires. 10 "
      Asked by: JACKDANIELS
      Hello JACKDANIELS, this handlebar does not come in 10". The additional parts you will need to make this work will be, Socket housing, two-way; Secondary lock, two-way socket housing; Seal pin (plug) (2); Pin housing, two-way; Secondary lock, two-way pin housing. Thank you for your question.
      Answered by: Iceman25
      Date published: 2015-10-19
      • y_2018, m_2, d_26, h_20CST
      • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasquestionsanswers, tq_10
      • loc_en_US, sid_PA-09-5748511, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Recently Viewed

        Please Hold Your Iron Horses

        You’ve been sitting idle, so your session will expire in

        Would you like to remain signed in and continue shopping?

        Yes, keep me signed in No, sign me out
        Item(s) Were Added to Your Cart
        Checkout Now
        Continue Shopping