Chrome and Rubber Large Heated Hand Grips

    Part Number 56100264


    Finish / Color: Chrome and Rubber




    A A A

    Chrome and Rubber both have their distinct places in the world of motorcycle styling. It seemed natural to bring the two together to create this unique collection.

    • Chrome and rubber padding design
    • Thermostatically controlled grips have variable heat settings and automatic temperature monitoring to adjust to changing ambient temperature
    • Grips remain at a constant temperature regardless of changes in outside temperature
    • Self-contained control circuit and control knob means you have no additional switches or controller boxes to mount
    • Shut on/off with ignition to avoid draining battery
    • Glueless grip design allows grip removal if you change handlebars or motorcycles


    • Material Diameter

      1.60 Inch
    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Left and right hand grips


    A A A

    Fits ’02-’17 VRSC™, ’96-later XL, ’08-’13 XR, ’96-’17 Dyna® (except FXDLS) and ’96-’15 Softail® (except FLSTSE, FLSTNSE, and FXSBSE) and ’96-’07 Touring models. ’14-later XL, ’12-’17 Dyna® and ’11-’15 Softail® models require separate purchase of Electrical Connection Kit P/N 72673-11. Does not fit ’96-’13 models with internally wired handlebars or FXDB models with Original Equipment handlebars. The power wires for these grips must be wired external of the handlebar. See accessory handlebars for specific heated hand grip exclusions.

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model


    Chrome & Rubber Large Heated Hand Grips is rated 3.0 out of 5 by 2.
    Rated 5 out of 5 by from Great choice and warm My 2007 Electra Ultra had heated grips on when I bought it this year and they were working up to the point when I bought the bike. I was trying to decide whether to buy heated gloves or replace the grips. I didn't want to deal with the wires from heated gloves but I read all the grip reviews and not to many were good. My decision was made for the grips because the original grips lasted 8 years. I rode home in 45 degree weather and during the half hour trip I had adjusted the temp down to #1 which is the coolest setting and my hands were toasty warm while wearing my summer full finger gloves. These grips are a little larger and are easier on my arthritic hands and when the heat is on its like therapy.
    Date published: 2015-12-17
    Rated 1 out of 5 by from Grips failed. Paid my local dealer to install a set of these. They worked great for one year then they just quit. Service adviser informed me that it would be best to just replace them because trouble shooting and fixing the old set would more than likely cost equally as much. The warranty was only 90 days.
    Date published: 2014-06-21
    • y_2018, m_2, d_26, h_20
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_2
    • loc_en_US, sid_PA-09-5617403C, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Q & A

    which heated grips are available for a internally wired handlebar?

    Asked by: Tomm
    Hi Tomm, There are concerns with wiring getting pinched which can cause wire failure. For this reason we don't validate any of our heated grips to be installed on internally wired handlebars.
    Answered by: Rockstar883
    Date published: 2016-03-08

    is the rubber replaceable on these grips?

    Asked by: shuggy
    Hi Shuggy, No, it is not possible to purchase the rubber separately. Thank you for your question.
    Answered by: FXS78
    Date published: 2015-09-28

    What temp. do the heated grips reach?

    Asked by: HMS5136
    Hello HMS5136, Unfortunately, we do not have access to that information to provide. Thank you for your inquiry!
    Answered by: JD34
    Date published: 2015-08-28

    Can you still use a throttle boss attachment with heated grips?

    Asked by: Rambler
    It's kind of hard to say since it's an aftermarket part. You may want to go to the manufacturer on this one.
    Answered by: RockyXL883
    Date published: 2013-10-23
    • y_2018, m_2, d_26, h_20CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_4
    • loc_en_US, sid_PA-09-5617403C, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Recently Viewed

      Please Hold Your Iron Horses

      You’ve been sitting idle, so your session will expire in

      Would you like to remain signed in and continue shopping?

      Yes, keep me signed in No, sign me out
      Item(s) Were Added to Your Cart
      Checkout Now
      Continue Shopping