Description
Complete kit replaces the under-saddlebag support found on some Touring models with loop-style saddlebag guards for a traditional look. Featured as Original Equipment on any Touring models, these chrome-plated guards protect the leading edge of the saddlebag, and are shaped to accept Saddlebag Guard Bags (sold separately) for added storage.
- Kit includes saddlebag supports, left and right guards and all necessary mounting hardware
- Chrome
Features
-
Warranty
1 year limited warranty – Go to www.h-d.com/warranty for full details -
Sold in Unit
Pair -
In The Box
Saddlebag supports, left and right guards and all necessary mounting hardware -
Sold Separately
Saddlebag Guard Bags
Fitment
Fits ’14-later FLHRSE, FLHRXS, FLHT, FLHX, FLHXS, FLHXSE, FLTRU, FLTRUSE, FLTRX,FLTRXS and FLTRXSE models. Stock on ’14-later FLHR, FLHRC, FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLHTKSE and FLTRK models
2016
- Road King FLHR
- Electra Glide Ultra Classic FLHTCU
- Electra Glide Ultra Classic Low FLHTCUL
- Ultra Limited FLHTK
- Ultra Limited Low FLHTKL
- CVO Limited FLHTKSE
- Street Glide FLHX
- Street Glide Special FLHXS
- CVO Street Glide FLHXSE
- Road Glide Ultra FLTRU
- CVO Road Glide Ultra FLTRUSE
- Road Glide FLTRX
- Road Glide Special FLTRXS
2019
- Road King FLHR
- Road King Special FLHRXS
- Electra Glide Standard FLHT
- Electra Glide Ultra Classic FLHTCU
- Ultra Limited FLHTK
- Ultra Limited Low FLHTKL
- CVO Limited FLHTKSE
- Street Glide FLHX
- Street Glide Special FLHXS
- CVO Street Glide FLHXSE
- Road Glide Ultra FLTRU
- Road Glide FLTRX
- Road Glide Special FLTRXS
- CVO Road Glide FLTRXSE
Bike not listed?
Select your year and model to see all the parts that fit your bike.
More Info
Note
These guards may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with another vehicle or any other object.
Reviews
Chrome Rear Saddlebag Guards is rated
out of
5 by
14.
Rated 5 out of
5
by
Fatboy97103 from
Must have protection
I picked these up after dropping my bike on some gravel. The only damage to the bike was the bottom front edge of the right side bag. I decided I wasn't going to take that chance ever again.
These bars install quickly, might have taken an hour tops. Took as long to strip off the seats, bags, side covers, and bag supports as it did to put on the new bars. These are sturdy, well finished, and a perfect fit. Well worth the money and I have no doubt that they will keep my bags form taking any damage if I put my bike down. Additionally, it will hold the bike a little higher and give a great place for the hand away from the handlebar when lifting the bike.
Fantastic purchase. Highly recommend.
Date published: 2018-02-18
Rated 5 out of
5
by
scuji57 from
Exactly what I expected from Harley
High quality. Good instructions. Easy installation.
Date published: 2017-03-16
Rated 5 out of
5
by
glider16 from
Glad I did it
I got these to protect the bags on my black quartz.RGS. In addition to the protection they may provide, they really look great against the black in an area of the bike is that is very dark and un-accented.
Wasn't sure if it was going to wreck the clean lines, but it doesn't. A little added protection and accent. What more could I ask for?
Date published: 2017-02-12
Rated 4 out of
5
by
rslackde from
Torque Settng
I purchased and installed the Saddlebag Guards on my 2015 Road Glide. I was puzzled by the torque specifications. One of the spec's would have me tighten a bolt to the point that the guard was crushed. Maybe it's me not understanding the spec.
On another note I understand the guards were installed on the finished motorcycle and not an after mfg add on. Why change?
Date published: 2016-04-12
Q & A
Do I need an extra part mount the antenna?
If so what is the part number?
Will these fit with the extended saddlebags?
Hey AFXray,
The length of the saddlebag guards are in line with the length of the standard bags. Due to the bend that wraps around the bottom of the stock hard bags, they won't clear the extra length on the stretched bags.
Date published: 2016-03-11
I dont see a place to hookup the exhaust mounts on the saddlebag guards
Hey ronnie,
5. Align the holes in the saddlebag guard short tube and
saddlebag support tube, and insert the 1/4-20 x 1-1/4 in
(32 mm) long hex socket head screw through the hole.
Install the locknut onto the screw threads, but do not
fully tighten.
6. Loosely assemble the muffler to the saddlebag support
rail with the 5/16-18 x 1/2 in (13 mm) long flanged hex
head screws and lockwashers, rubber mount and bracket removed earlier.
Date published: 2016-01-16
What is the diameter of these guards? I'm wanting to mount a passenger drink holder to them.
Recently Viewed
Loading...
Please Hold Your Iron Horses
Please Hold Your Iron Horses