Curved License Plate Frame with LED Lighting

    Part Number 67900273


    Finish / Color: Gloss Black




    A A A

    Dress up the rear of your Street Glide® or Road Glide® model and add practical auxiliary lighting at the same time. Designed to replace the Original Equipment black license plate bracket, this curved license plate frame is shaped to hug the contours of the rear fender.

    • Gloss black
    • Designed to replace the Original Equipment black license plate bracket
    • Mount attaches to the underside of the rear turn signal bar
    • Smooth license plate frame with signature Harley-Davidson® script appears to float above the fender for a custom look
    • Two vertical LED halo lights glow while in the run mode and burn brightly when the brakes are applied
    • Includes all necessary harnesses and connectors to enable complete installation – no drilling or wire splicing is required


    • Lighting Type

    • Lighting Color

    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      License plate frame, LED lamp and harness assembly, hardware, tape, reflector and base assembly, wire harness, cable straps


    A A A

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model

    More Info

    A A A


      Disconnecting your DOT requirement brake lamp could reduce your visibility to others and result in death or serious injury.


      Curved License Plate Frame with LED Lighting is rated 5.0 out of 5 by 2.
      Rated 5 out of 5 by from Space is getting tight under the seat, technical documents lacking... Nice upgrade from stock that adds some extra illumination to the back. Easy to install with a little patience and dexterity. Situation is that I have also picked up the hard pack LED lights. Both of these addons need to use the rear lighting connector under the seat for signalling and power. I ended up daisy chaining the different connects through the rear lighting connector. LEDs don't draw much current, so I guess I'll find out if it is a long-term problem or not. At first, the license plate lights would not come on whereas the hard pack LEDs and rear LED bullets worked just fine. There is a white button on the license plug where it connects to the Y-adapter (that is used to connect through the rear lighting connector). No description of what this button is or how it is used is given in the instructions. After several attempts in ACC and ON, and holding that button in for various lengths of time, I finally got the licence plate LEDs to come on and stay on. We'll see how long that lasts. For now, I like the color, I like the extra lights, I like the construction, I like the look. I am still out on how HD is running so many of the accessory light packages through the same connector and just what some of the electrical hardware actually does.
      Date published: 2017-07-10
      Rated 5 out of 5 by from Looks good and easy to install Nice upgrade from the stock license plate mount. Easy to install, took about 30 minutes. Looks great and adds some visibility with the extra running and brake lights.
      Date published: 2017-06-02
      • y_2018, m_2, d_26, h_20
      • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_2
      • loc_en_US, sid_PA-04-67900273, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Q & A

      Is this a additional brake/running?

      Is this set up an additional brake/running light to the stock brake/running turn signal lamp or does it eliminate the stock brake/running light?
      Asked by: G0H0
      Hi G0H0, The Curved License Plate Frame w/ LED is a replacement for the OE black license plate bracket. It is not an additional brake/running light nor is it eliminating. Hope this helps!
      Answered by: RowdyGrl79
      Date published: 2018-01-24

      Wire connector plug in

      Which plug in does the wire connector use, and where is it located?
      Asked by: John1727
      Hi John1727, 2010-2013 models: Plug the Curved License Plate Frame harness connector into the capped four-way Deutsch P&A Accessory connector [4]. This connector is located under the seat, in front of the Electronic Control Module (ECM). If the P&A Accessory connector is already in use, a dual accessory harness (Part No. 70264-94) is available from a Harley-Davidson dealer. 2014-later models: Get the license plate lamp Y-harness (11) from the kit. a. See Figure 4. Separate the black six-way Molex rear lighting connector [7] on top of the Electronic Control Module (ECM) caddy. b. Plug the Y-harness into open connectors [7A] and [7B]. c. Plug the Curved License Plate Frame connector into the Y-harness.
      Answered by: RowdyGrl79
      Date published: 2016-09-14
      • y_2018, m_2, d_26, h_20CST
      • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasquestionsanswers, tq_2
      • loc_en_US, sid_PA-04-67900273, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Recently Viewed

        Please Hold Your Iron Horses

        You’ve been sitting idle, so your session will expire in

        Would you like to remain signed in and continue shopping?

        Yes, keep me signed in No, sign me out
        Item(s) Were Added to Your Cart
        Checkout Now
        Continue Shopping