Softail Slim Pull Back Riser Kit

    Part Number 55900023


    Finish / Color: Chrome




    A A A

    Ideal for riders with a short reach or for those that prefer an upright riding position, these curved risers and the matching handlebar clamp are shaped to put the Original Equipment Softail® Slim handlebar closer to the rider

    • 4.5" high risers are compatible with the stock control cables and brake lines for a low-cost conversion
    • Provides 1.75" of rise and 1.5" of additional pull back when compared to the stock FLS riser
    • Designed for easy installation


    • Material Content

    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Handlebar risers, clamp, and screws


    A A A

    Fits most '12-'17 FLS and FLSS and '18-later FLSL models. '15-'17 FLS and FLSS models equipped with ABS brakes require separate purchase of Brake Line P/N 41800300. Also fits most 1.0" diameter handlebars with separate purchase of additional components. Does not fit Springer™ models. Riser height 4.5".

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model

    More Info

    A A A


      Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.


      Softail Slim Pullback Riser Kit is rated 5.0 out of 5 by 5.
      Rated 5 out of 5 by from should say metal pain reliever I had been riding my slim with its stock risers for a month, surely that wasn't what was hurting my back. LOL I put the pullback riser kit on and the pain started to go away, it might as well have been a chiropractor. The bike felt like a completely different bike. If you don't want to be the hunchback of notre dame get these risers!
      Date published: 2016-01-01
      Rated 5 out of 5 by from Excellent mod! This is the second set I have installed on a Slim. I am 5' 4" and with these installed I can sit up straight and enjoy the ride even more. Easy install, well built. Excellent fit and finish! Recommended..
      Date published: 2015-10-07
      Rated 5 out of 5 by from Softtail Risers These are great !!!! Bought the 2015 SoftTail Slim for my wife, she is about 5' 5", so she had to reach forward a little when riding. But these risers made it so much easier for her. Now she rides much more comfortably. Very easy install, Only took about 15 minutes to swap out the risers. And somehow these risers gave the bike an even better look.
      Date published: 2015-09-02
      Rated 5 out of 5 by from Exactly what I needed... I am 5'7" and have wide shoulders. I'm built like a tank. I like the Hollywood bars and didn't want to get Ape bars or beach cruiser bars. I didn't want to spend a lot of money. This kit was a great price and didn't need to buy any thing else to get them installed. The pull back riser kit does exactly that. It rises the bar and pulls it back just right. It feels lighter to turn the bars and I have better control steering plus I can sit more up right. It looks good on the Slim. My footing on the moon pads is more positive and I have more riding positions to get comfortable during long rides. The bike feels more apart of me now and I don't feel like the bike is to big for me. I would get this before buying a new seat if the bike feels soo big that you are stretching with your arms full extended.
      Date published: 2015-08-30
      • y_2018, m_2, d_26, h_20
      • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_5
      • loc_en_US, sid_PA-09-5629005, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Q & A

      Black yet?

      I read the previous question on Dec 2016. It's been well over a year. Just wondering if there was any luck on a black Slim Riser yet? I own a 2016 Slim S. The black Slim riser would be great instead of aftermarket.
      Asked by: DonnyH3

      pull back risor kit for softtail slim

      I purchased this to help with my back issues but I couldn't install it because of the stock wires, everywhere I read said this wouldn't be an issue. Does anyone have any suggestions
      Asked by: whitelightning


      Does anyone know if these come in black and where I can get them??? thanks for your time and happy holidays
      Asked by: whitelightning
      Hello Hockessin, DE We do not currently carry these risers in black. I have has several request for these in black, so there is a possibility that we will offer theses a t a later date. We release new products twice a year, August when our new models come out and January. Please continue to visit our site to check back in and your local dealership can help you as well. Thank you for checking in with us. Have a great day.
      Answered by: Roadglide33
      Date published: 2018-01-04

      What's the bolt size and thread pitch?

      What size bolts are needed to bolt the risers to the top tree? 1/2"-13?
      Asked by: Steve262
      Hey Steve262, You are dead on, the bolt size is .500 - 13 UNC.
      Answered by: Rockstar883
      Date published: 2018-01-04
      • y_2018, m_2, d_26, h_20CST
      • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasquestionsanswers, tq_4
      • loc_en_US, sid_PA-09-5629005, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Recently Viewed

        Please Hold Your Iron Horses

        You’ve been sitting idle, so your session will expire in

        Would you like to remain signed in and continue shopping?

        Yes, keep me signed in No, sign me out
        Item(s) Were Added to Your Cart
        Checkout Now
        Continue Shopping