Extreme Reach Handlebar

    Part Number 55800563


    Finish / Color: Chrome




    A A A

    Extensively tested with a panel of riders between 5'-0" to 5'-5" tall, this Extreme Reach® Handlebar and recommended riser combination was proven to be the most ergonomically pleasing handlebar for many Dyna® and Softail® models.

    • Chrome finish
    • Shaped to provide the ideal balance of pull back and width
    • Produces an overall pull back of 11.0" and a tip-to-tip width of 30.0" when combined with Curved Riser Kit P/N 56266-09 (sold separately and shown in second image)
    • Hands fall naturally in place and the narrow width reduces your stretch while making low-speed turns and parking lot maneuvers
    • See Guides tab for additional components required for installation


    • Material Content

    • Material Diameter

      1.0 Inch
    • Tip-to-Tip

      30.0 Inch
    • Base Width

      11.75 Inch
    • Knurl Center-to-Center

      3.14 Inch
    • Rise

      5.25 Inch
    • Pullback

      11.0 Inch
    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Handlebar only
    • Sold Separately

      Curved Riser Kit P/N 56266-09


    A A A

    Fits '06-'17 Dyna® (except '14-'17 FXDL) and '00-'17 Softail® models (except FLSS, FLSTFBS, FXCW, FXCWC, FXS, FXSB, FXSTD and Springer™). Does not fit CVO™ models. All models require separate purchase of additional installation components.

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model

    More Info

    A A A


      Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.


      Extreme Reach Handlebar is rated 4.0 out of 5 by 4.
      Rated 5 out of 5 by from Fantastic improvement! I love these Handlebars! My old bike was a little shorter reach from the seat, and I had installed buckhorn bars - so the 6" riser & extreme reach bars give the new bike more of the look & feel of what I had become accustomed to over the last twelve years. Yes, I am within the height range mentioned, and I strongly recommend this product to anyone of similar height.
      Date published: 2016-08-08
      Rated 5 out of 5 by from Replacement for Mini-Apes For me, these are the perfect replacement for the standard Mini-Apes on my 2009 Dyna Street Bob. I feel more in control, and I think they improved the appearance tremendously and look perfect! The upgrade included Diamond Back cables and make the bike look like a million dollars. I'm 5'10"/190 lbs., and they are a perfect fit for me.
      Date published: 2016-08-05
      Rated 4 out of 5 by from Serves the purpose These bars worked quite well for what I wanted them to do. Installed on a Deluxe, did not need to buy a riser and cables like HD says you will need.
      Date published: 2016-06-15
      Rated 2 out of 5 by from Product fitment did not match website The HD website stated that the bars would fit my 2015 Street Bob but the label on the bars said they would not so I did not want to spend a lot of time and money getting them installed to find they were incorrect. The part numbers were the same. I still love my new Street Bob and will seek other ways to improve fitment.
      Date published: 2015-10-06
      • y_2018, m_2, d_26, h_20
      • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_4
      • loc_en_US, sid_PA-09-55800563, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Q & A

      What does "n/a" mean on the fitment chart for these handlebars? The part isn't needed? Not available?

      I am considering a 2012 Super glide, but will want to replace the stock bars with the extreme reach bar. The fitment chart says "n/a" in the column for extended cables, and appears to indicate that only extended wire harnesses are required. Will longer cable be needed?
      Asked by: Ridewest

      Will This work with my current Controls

      2010 Fat Bob FXDF, I have Drag Bars Now and am in my 70s. Want a Handlebar I can lean back a little, Will my current cables and wiring work with this Handlebar. I know I have to order new risers as mine are 1-1/4" and these take 1" risers. Thanks for your help!
      Asked by: Dave125

      Dimensions of the bars

      What are the dimension differences from these bars and the stock bars of a 2013 FXDC
      Asked by: Brian20
      Hey Brian20, P/N 55800563 Extreme Reach Handlebars MATERIAL DIAMETER 1.0 Inch TIP-TO-TIP 30.0 Inch BASE WIDTH 11.75 Inch KNURL CENTER-TO-CENTER 3.14 Inch RISE 5.25 Inch PULLBACK 11.0 Inch P/N 56102-99 Original Equipment Handlebars '13 FXDC MATERIAL DIAMETER 1.00 TIP-TO-TIP 30.00 PULLBACK 9.25 RISE 5.25 BASE WIDTH 11.75 KNURL WIDTH 3.14 Hope this helps you out! Rockstar883
      Answered by: Rockstar883
      Date published: 2017-06-29

      Will this fit in the stock raiser of my 2015 FXDB Street Bob?

      I dont want to change my stock raisers so will there be any problem in installing it in my stock raisers?
      Asked by: Bidesh
      Hi Bidesh, For the Extreme Reach Handlebar a separate Riser Kit, P/N 56266-09, is needed for adjustment. As a reminder, parts available on the H-D Online Store are validated for US model bikes.
      Answered by: RowdyGrl79
      Date published: 2016-12-17

      Will this handlebar fit 2016 fatboy lo without re-wiring?

      My dealer is asking $1600 to install this as he says with the risers they have to re cable because of abs.
      Asked by: Mgovinda
      Hello Mgovinda I've attached the required parts to make the conversion. As for labor quotes, work with the dealer directly. Have a Great Day!!!
      Answered by: Rockstar883
      Date published: 2016-11-19
      • y_2018, m_2, d_26, h_20CST
      • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasquestionsanswers, tq_13
      • loc_en_US, sid_PA-09-55800563, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Recently Viewed

        Please Hold Your Iron Horses

        You’ve been sitting idle, so your session will expire in

        Would you like to remain signed in and continue shopping?

        Yes, keep me signed in No, sign me out
        Item(s) Were Added to Your Cart
        Checkout Now
        Continue Shopping