Heritage Softail Classic Handlebar

    Part Number 56623-99A


    Finish / Color: Chrome




    A A A

    This chrome-plated bar is 1.25" narrower, 2.0" taller, and features 2.0" less pullback than the Original Equipment ’09-'17 FLSTC Heritage Softail® Classic bar.

    • Also a direct replacement for the stainless steel handlebar P/N 56569-86 featured as Original Equipment on '86-'08 FLSTC models
    • See Guides tab for additional components required for installation


    • Material Content

    • Material Diameter

      1.0 Inch
    • Tip-to-Tip

      31.25 Inch
    • Base Width

      11.50 Inch
    • Knurl Center-to-Center

      12.0 Inch
    • Rise

      12.0 Inch
    • Pullback

      5.0 Inch
    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Handlebar only
    • Sold Separately

      Additional installation components


    A A A

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model

    More Info

    A A A


      Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.


      Heritage Softail Classic Handlebar is rated 5.0 out of 5 by 3.
      Rated 5 out of 5 by from Heritage Classic Softail Handlebars My wife didn't care for the handlebars that came on her '03 Heritage Classic as she had to lean over to hold them and was uncomfortable on any ride more than 5 miles. We purchased these, received them on time and they were easy to install. Made a huge difference in her level of comfort as she's able to sit up straight. A++ on these!
      Date published: 2016-12-02
      Rated 5 out of 5 by from 2006 Heritage Softail FLSTI I recently installed these bars on my 2006 Heritage Softail FLSTI. The FLSTI is different than the FLSTCI in that the FLSTI has a Fat Boy style handlebar. I needed a taller bar that would work with existing cables and wiring and these did the trick. At 5'8" these got me in a more upright riding position that took pressure off of my upper back and is much more comfortable. Short armed, I only had to adjust the bars back slightly for reach. The fit and finish on the bars are excellent.
      Date published: 2015-01-19
      Rated 5 out of 5 by from Just the way a road king should feel I am 5'11" and 250 lbs riding an 02 road king and after leaning forward to hold the factory bars I would find myself slouching with my hands and my boys going to sleep and tingling. This was not comfortable after a while and I wanted to be able to go more than just around town and back and feel comfortable. After installing these bars for a soft tail with a 12" rise and a little more pull back, and an air hawk seat cushion, I was in a very comfortable position to ride for a tank full of gas at a time. I am looking forward to a trip now that my road king feels like a real bike.
      Date published: 2014-09-10
      • y_2018, m_2, d_26, h_20
      • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_3
      • loc_en_US, sid_PA-09-5662399, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Q & A

      Internal Wiring & TBW

      This looks like an old P/N so I'm wondering if I can use these for internal wiring and TBW?
      Asked by: Gamma742

      Can cables be run inside of the bars?

      Asked by: Matts2112

      what diameter are these bars?

      want to install them on a 2004 FLHRSI do I need extra parts?
      Asked by: 7maurip
      Hello Maurip, The diameter of these handlebars are 1". The recommended fitment for these handlebars is: "Fits '86-later FLSTC models. '09-later models require separate purchase of cables and brake lines." Please contact your local dealer for additional information regarding fitment and additional items needed. Thank you!
      Answered by: JD34
      Date published: 2015-01-15


      Are these bars dimpled for wires coming from the hand grips past the brake and clutch levers? Thanks
      Asked by: gcamwv
      • y_2018, m_2, d_26, h_20CST
      • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasquestionsanswers, tq_4
      • loc_en_US, sid_PA-09-5662399, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Recently Viewed

        Please Hold Your Iron Horses

        You’ve been sitting idle, so your session will expire in

        Would you like to remain signed in and continue shopping?

        Yes, keep me signed in No, sign me out
        Item(s) Were Added to Your Cart
        Checkout Now
        Continue Shopping