Narrow Beach Handlebar

    Part Number 56857-05A


    Finish / Color: Chrome




    A A A

    This beefy 1-1/4" handlebar sets the tone for a full-on custom ride.

    • Chrome-plated fat bar combines the low rise and sweeping shape of a beach-style bar with a narrower tip-to-tip width for added rider comfort
    • Factory drilled to allow internal wiring for show-winning style
    • See Guides tab for additional components required for installation


    • Material Content

    • Material Diameter

      1.25 Inch
    • Tip-to-Tip

      32.60 Inch
    • Base Width

      9.0 Inch
    • Knurl Center-to-Center

      3.14 Inch
    • Rise

      9.01 Inch
    • Pullback

      6.60 Inch
    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      A handlebar, grommets, and shrink tubing
    • Sold Separately

      Additional installation components


    A A A

    Fits '12-'16 FLD, '13-'17 FXDB and '00-'17 FLSTC, FLSTF, FLSTFB, FXST, FXSTB, FXSTC, FXSTD and '18-later Softail® models (except FXDRS, FXFB, and FXFBS). May require separate purchase of riser kit and additional installation components. Compatible with accessory heated grips (except FLHTK Heated Grips or Black Rubber Heated Hand Grips P/N 56100034)

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model

    More Info

    A A A


      Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.


      Narrow Beach Handlebar is rated 4.0 out of 5 by 1.
      Rated 4 out of 5 by from not really beach bars I ordered these and sent them back and got the bigger ones. so beware these bars are not really beach bars. they are good quality but they are just small. if you want the beach bar look and feel, get the other beach bars that harley offers.
      Date published: 2014-09-24
      • y_2018, m_2, d_26, h_20
      • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_1
      • loc_en_US, sid_PA-09-5685705, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Q & A

      Does this bar use the stock brake and clutch cables on an '03 Heritage?

      Asked by: CAzmoDee
      Hello CAzmoDee, All models require separate purchase of Riser Kit P/N 56916-07 and additional installation components. Please see your local dealership for further instructions. Thank you!
      Answered by: SoStreet
      Date published: 2017-01-21

      Will the cables need replaced on 2015 FLSTC?

      Asked by: Jerry39
      Hi Jerry39, When replacing any handlebars, it is recommended and required to change out the clutch cables, throttle/idle cables and possibly the riser kit. If you have original equipment only the clutch cables and riser kit are usually recommended for change. Please see and under the More Info tab for the Narrow Beach Handlebar there is information available for changing the handlebar. Hope this helps!
      Answered by: RowdyGrl79
      Date published: 2016-11-16

      Will this fit on the 2008 FLSTN Softail Deluxe ?

      Asked by: armedjetflyer
      Hi Armedjetflyer, No, this Narrow Beach Bar Handlebar will not fit on a 2008 FLSTN. It fits '12-later FLD, '13-later FXDB and '00-later FLSTC, FLSTF, FLSTFB, FXST, FXSTB, FXSTC and FXSTD models. Thank you for your question.
      Answered by: FXS78
      Date published: 2015-11-12

      Typo on specs?

      It reads knurl to knurl is 9.01". Is this a typo?
      Asked by: PeterQ731
      Hi PeterQ731, Thanks for catching that typo. The knurl is 3.14" for this handlebar. I will get that revised ASAP. Thank you!
      Answered by: PeteHD
      Date published: 2014-10-06

      Will this handlebar work with Chrome Freight Train Headlight Nacelle part #67907-96C

      It seems a number of handlebars are offered to fit the Fat Boy Lo as replacements for the stock bars but few, if any, work with the Freight Train Headlight Nacelle. My previous question on the black variation went unanswered. Hoping someone can answer this one. Thanks!
      Asked by: Hondo
      Hello Hondo! Unfortunately, the Chrome Freight Train Headlight Nacelle will not fit the Narrow Beach Bar Handlebar. As you have stated, it is very rare to see a handlebar that will accommodate the Chrome Nacelle on a Night Train. Thanks!
      Answered by: RowdyGrl79
      Date published: 2016-04-04
      • y_2018, m_2, d_26, h_20CST
      • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasquestionsanswers, tq_7
      • loc_en_US, sid_PA-09-5685705, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Recently Viewed

        Please Hold Your Iron Horses

        You’ve been sitting idle, so your session will expire in

        Would you like to remain signed in and continue shopping?

        Yes, keep me signed in No, sign me out
        Item(s) Were Added to Your Cart
        Checkout Now
        Continue Shopping