Road Glide LED Fog Lamp Mount Kit - Chrome

    Part Number 68000183


    Finish / Color: Chrome




    A A A

    This elegant Mount Kit replaces the Original Equipment turn signal mount, and positions the Daymaker™ Reflector LED Fog Lamps and turn signals close to the fairing for a custom look.

    • Chrome Mount Kit
    • Installation provides a supplemental pool of light in front of the motorcycle
    • Add a clean, uncluttered look to your bike's profile
    • Includes left and right mounts and all required hardware
    • Requires separate purchase of Daymaker™ Reflector LED Fog Lamps


    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Left and right mounts and all required hardware
    • Sold Separately

      Daymaker Reflector LED Fog Lamps


    A A A

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model


    Road Glide LED Fog Lamp Mount Kit - Chrome is rated 4.5 out of 5 by 4.
    Rated 4 out of 5 by from Nice looking Road Glide LED mount kit Nice chrome mount kit, my only disappointment is the cable from the light itself does not get routed through the mount it is ran exposed behind the mount.
    Date published: 2016-12-15
    Rated 5 out of 5 by from Still Feeding the Chrome Addiction Harley-Davidson is notorious for selling you an awesome motorcycle fully KNOWING that you will need to - at some point, accessorize. I really love the way these looked and I had these installed by the professionals at Smokey Mountain Harley-Davidson in Maryville, Tennessee. They did a very nice job; as always Love the look and highly recommend. Thank you!
    Date published: 2016-07-08
    Rated 5 out of 5 by from Road glide LED fog light mount kit. This is one beautiful kit installed on my 2015 Road Glide. I have the chrome kit and it was a lot easier to install than I imagined. I just have to figure out how to get the power to the Harley fog light set I purchased with the appropriate switch, so I can see them working. The wiring instructions that came with the mount kit doesn't work. No problem, the dealership can fix that. Look at how the kit transform the frontal view and you will appreciate it's addition. I also have the blacked out turn signal lense kit, yeah.
    Date published: 2016-01-03
    Rated 4 out of 5 by from Fog Lights I got these fog lights just because i hadn't seen anyone else with them on a Road Glide Special. I installed them myself and it was somewhat of a nightmare, but i got it done and it looks bright and good. Few things tho you need the Dash panel kit Pt#71400105 for the Day Maker Fog lights to work, extra wire 14-16 gauge and shrink wrap because you need to run it from the fairing under the gas tank up under the seat to the wire harness and relay connect. I didn't take the gas tank completely off i just unscrewed lifted while my cousin zip tied it to a few other lines being ran under the gas tank. FYI do not install using the instruction from the Fog Lights doesn't work.
    Date published: 2015-11-13
    • y_2018, m_2, d_26, h_20
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_4
    • loc_en_US, sid_PA-11-68000183, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Q & A

    When with the Road Glide LED Fog Lamp be validated for the 2016 CVO Road Glide Ultra?

    Asked by: Squint

    Road Glide Fog Lights

    Would I be able to install these fog light in the downward position in other words with the fog lights place underneath the turn signal light?
    Asked by: Miguel
    Hi Miguel, No, the fog lamps cannot be placed underneath the turn signal. This is an U.S. violation that you may want to avoid. Hope this helps!
    Answered by: RowdyGrl79
    Date published: 2017-01-05

    Will this also fit a 2016 CVO Road Glide Ultra?

    Asked by: AFChief
    Hi AFChief, The Road Glide LED Fog Lamp is not validated for the 2016 CVO Road Glide Ultra. Thanks!
    Answered by: RowdyGrl79
    Date published: 2017-07-14

    2015 Road Glide Special without Switch

    I followed the instructions for installation, supposed to be plug and play for the bike - it direct wires into the harness. Based on the instructions and the P&A catalog - I don't need to add a switch... there doesn't appear to be power to the lights through the harness. What am I missing???
    Asked by: Dahulk

    Are the wires hidden for the turn signals and fog lamps?

    Asked by: DonMcCPA
    All the wiring will end up tucked into the inner fairing and covered by the outer fairing. Once installed, it's a very clean look.
    Answered by: Rockstar883
    Date published: 2015-09-24
    • y_2018, m_2, d_26, h_20CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_5
    • loc_en_US, sid_PA-11-68000183, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Recently Viewed

      Please Hold Your Iron Horses

      You’ve been sitting idle, so your session will expire in

      Would you like to remain signed in and continue shopping?

      Yes, keep me signed in No, sign me out
      Item(s) Were Added to Your Cart
      Checkout Now
      Continue Shopping