Road Tech zumo Handlebar Mount Kit

    Part Number 76000192B


    Finish / Color: Black




    A A A

    This installation kit is designed for handlebar mounting of the Road Tech™ zumo GPS system on specified Harley-Davidson® models. Replacing the left-hand half clamp, this sweeping gloss black bracket accepts the connection cradle for the Road Tech™ zumo GPS system.

    • Fits 1" and 1.25" handlebars


    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Bracket and all required hardware


    A A A

    Fits ’02-'17 VRSC™ (except VRSCF and VRSCR), ’96-later XL and XR, '96-'17 Dyna®, '96-later Softail® and '96-later Road King®, '97-'13 Road Glide® and ’14-later Touring and Trike models equipped with Road Tech™ zumo 590, 660 or 665 GPS units. XL and XR models require separate purchase of (2) Screw P/N 4669M. Does not fit with Road Tech™ Satellite Radio, Left-Hand Auxiliary Switch Housing or Clutch Lever Bracket Clamp Clock or Thermometer. Must be wired on exterior of handlebar.

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model


    Road Tech zumo Handlebar Mount Kit is rated 4.8 out of 5 by 5.
    Rated 5 out of 5 by from Mounted on softail Deuce Nice product. Put GPS in nice position to see and operate. Will not interfere with windshield bags. Holds Zumo 660 great. Very happy with everything but seems a little expensive. Overall would buy again.
    Date published: 2017-05-26
    Rated 5 out of 5 by from Great look Great style and look install is very simple very sturdy. Puts the GPS right in your view.
    Date published: 2016-04-16
    Rated 4 out of 5 by from Blends in nicely with the bike I purchased this kit for a 2014 Road King. Make sure you read the additional information regarding what else you might need. In my case, i needed an additional wiring harness, which is listed in the instructions. But i was able to connect the device to a spare fuse without too much difficultly. Other than that little hick up, the kit fits well and the GPS fits perfectly to the mount. This is a much nicer and cleaner mount than generic mounts.
    Date published: 2014-04-02
    Rated 5 out of 5 by from Does what it should I installed this on a 2011 Wide Glide. It is easy to install, is fully adjustable for proper viewing angle, and is very rigid (no vibration).
    Date published: 2013-10-22
    • y_2018, m_2, d_26, h_20
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_5
    • loc_en_US, sid_PA-08-76000192, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Q & A

    What's the approximate length of the mount "arm"?

    Not including the GPS mount plate...just the arm.
    Asked by: krashbars
    Hello Krashbars, Unfortunately, I do not have that information available at this time. Thank you!
    Answered by: JD34
    Date published: 2015-03-17

    will this mount work with other gps units

    Asked by: posum3775
    Unfortunately no, it's only meant for the Zumo 660 and 665.
    Answered by: RockyXL883
    Date published: 2013-10-23
    • y_2018, m_2, d_26, h_20CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_2
    • loc_en_US, sid_PA-08-76000192, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Recently Viewed

      Please Hold Your Iron Horses

      You’ve been sitting idle, so your session will expire in

      Would you like to remain signed in and continue shopping?

      Yes, keep me signed in No, sign me out
      Item(s) Were Added to Your Cart
      Checkout Now
      Continue Shopping