Round Bar End Mirror - Left

    Part Number 56000134A


    Finish / Color: Satin Black




    A A A

    Complete the cut-down Café bike look. Thid Bar End Mirror provide a clean, streamlined look when compared to traditional mirrors. Thid round convex mirror plugs into the end of the handlebar to extend beyond the hand grip for an improved field of view on the bike equipped with narrow bars. When equipped with the Bar End Mirror Hand Grips (sold separately), the mirror is simply inserted into the end of the grip and tightened in place.

    • Left hand mirror
    • Adjustable for maximum rear visibility
    • Can be positioned above the bar or in some configurations, below the bar
    • When positioned below the bar, the left hand mirror is used on the right side
    • Includes hardware required to fit both 7/8" or 1" bars
    • Right and left mirrors are sold separately
    • Complete the look with the right hand mirror P/N 56000133


    • Side of Bike

    • Mounting Style

    • Adjustable

    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Left hand mirror, all required mounting hardware
    • Sold Separately

      Hand Grip 56100199 or 56100202 & Right Hand Mirror


    A A A

    Fits stock or accessory handlebars on ’15-later XG (except models equipped with Drag Bar P/N 55800225 or 55800238), ’02-'17 VRSC™ (except VRSCF), '96-later XL and XR, and '96-'17 Dyna® (except FXDLS), ’96-’15 Softail® (except FLSTNSE, FXSBSE and ’11-’12 FLSTSE) and ’96-’07 Touring models. Installation requires separate purchase of Diamond-Black Hand Grip P/N 56100199 (1") or 56100202 (7/8").

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model

    More Info

    A A A


      Harley-Davidson® Motor Company cannot test and make specific fitment recommendations concerning every possible mirror and handlebar combination. Therefore, after installing new mirrors or handlebars and before operating the motorcycle, check to ensure that the mirrors provide the operator a clear view to the rear, and do not come into contact with other motorcycle components.


      Round Bar End Mirror - Left is rated 3.3 out of 5 by 3.
      Rated 4 out of 5 by from Great mirror Great replacement mirror, only fault I found was that it doesn’t fit the factory drag bar cutout on the Street Rod 750. Other than that small cutout it fits and works as needed.
      Date published: 2017-10-23
      Rated 5 out of 5 by from Love these things I have a softail slim with the diamond black grips. To install you will need to take a Dremel and grind down the rubber gasket that was holding the end cap. Another thing is make sure you have the mirrors position so that it’s has the wording on the mirror at the bottom. If you don’t the mirror will hit your hand on the slim. I installed my with the mirror stem slightly out of the grip to give my hand more room. These are convex mirrors so they do look a little different. Overall, great quality and they look so good on the bike. I tried to have the mirrors hand low but it’s just too hard to see.
      Date published: 2017-10-15
      Rated 1 out of 5 by from Same part number as stock XG750a, different part This will not fit a 2017 Strret Rod. Although it has the same part number printed on the part, the one that came with the bike is different from this replacement. The stalk does not the tab needed to connect to the Street Rod handle bar. They look identical, right to the PN markings but they are not interchangeable. Why Harley would do this is beyond me. This will go back to HD and I'll go 3rd party to replace my bike mirror. Unacceptable.
      Date published: 2017-08-19
      • y_2018, m_2, d_26, h_20
      • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_3
      • loc_en_US, sid_PA-14-56000134, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Q & A

      What grips do these work with? Will they need to be cut or modified?

      Asked by: Randy883r
      Currently, they only work with the NEW Diamond Black grips that Harley offers for this mirror application. Diamond Black Hand Grips - Bar End Mirrors Part Number 56100199 Hope this helps you!
      Answered by: BluesCowboy
      Date published: 2017-07-29
      • y_2018, m_2, d_26, h_20CST
      • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasquestionsanswers, tq_1
      • loc_en_US, sid_PA-14-56000134, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Recently Viewed

        Please Hold Your Iron Horses

        You’ve been sitting idle, so your session will expire in

        Would you like to remain signed in and continue shopping?

        Yes, keep me signed in No, sign me out
        Item(s) Were Added to Your Cart
        Checkout Now
        Continue Shopping