Short Angled Adjustable Highway Peg Mount Kit

    Part Number 50830-07A


    Finish / Color: Chrome




    A A A

    Stretch out for added comfort. This chrome-plated Adjustable Highway Peg Mounting Kit can be set for shorter riders, and it can be reversed to reach far forward for those with long legs.

    • 2.5" angled peg mounting kit in chrome finish
    • Angled design allows the arm to reach back and around to clear fairing lowers
    • Arm can be raised and lowered for a custom fit
    • Mounting clamp firmly grips the engine guard, and the locking design secures the peg at the desired angle
    • Includes chrome-plated mounting hardware
    • Footpegs sold separately


    • Adjustable

    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Left and right side mounts and arms
    • Sold Separately



    A A A

    Fits 1.25" engine guards. Does not fit with Chopped Engine Guards.

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model

    More Info

    A A A


      Do not use highway pegs under normal stop and go operating conditions. Doing so could result in death or serious injury.


      Short Angled Adjustable Highway Peg Mount Kit is rated 4.2 out of 5 by 25.
      Rated 3 out of 5 by from Good Looking but Challenging Installation Was excited to get these peg mounts and pegs and planned to install them this Labor Day weekend on my Road Glide Ultra. Finally gave up and will plan to go to the dealer to have them put on. Just getting the screw loosened without scratching the chrome took an act of God. Not sure why the mounts would come delivered with loctite on the screws. Also, not all washers referenced in the instructions were actually included with the mounts. Not my first disappointment with ordering accessories online. Good looking mounts and pegs but would seriously recommend just having dealer install these and other accessories to avoid being frustrated. Would have rated higher if easier to install.
      Date published: 2017-09-02
      Rated 5 out of 5 by from Great for 30" inseam I originally purchased the billet engine guard foot peg mounting kit part 5097-02B but not comfortable on this dude's 30" inseam. These do the trick. I angled them in towards the rider and these are very comfortable. Pictured with the airflow collection footpegs on my bike.
      Date published: 2017-08-08
      Rated 5 out of 5 by from Short Angled Adjustable Highway Peg Kit Perfect purchase. There are so many options for highway pegs so I went to my dealer for advice and I'm glad I did. He measured me up (my wife too) she drives as well. I'm 6'1" with a 34" inseam and this short angled kit with the Crested B&S Footpegs worked perfectly. I was concerned about them fitting around the lower fairings on our Tri Glide and they do and look great. They are very well made with several adjustments to fit just about anyone.
      Date published: 2017-04-06
      Rated 5 out of 5 by from Nice Real Nice I purchased them and installed them after my 15K check up, in a year. The installation was a breeze. The hardest part of the entire process was decieding on the right height. Once I did that, easy peazy. I had been concerned due the radiator leg flaring, but it was soon obvious that was not going to be a problem. Lots of angles to go with and at 6'1" and and inseam of 36" I found my, slightly bent leg spot and tighened them down. I have been missing the highway pegs, this last year, my other Harley had them.
      Date published: 2016-08-11
      • y_2018, m_2, d_26, h_20
      • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_25
      • loc_en_US, sid_PA-07-5083007, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Q & A

      are you able to adjust the angle of the pegs or floorboards with these mounts?

      Asked by: brokefootkenny
      Hi Brokefootkenny, Okay, the Short Angled Adjustable HWY Peg Mounts can be maneuvered---only up and down for desired comfort--position can be locked. Hope this helps!
      Answered by: RowdyGrl79
      Date published: 2017-07-24

      Will this product adjust to fit a 1 1/4" Hwy bar?

      Asked by: BartJae
      Hi BartJae, This will fit a 1.25 Hwy bar. Thanks!
      Answered by: RowdyGrl79
      Date published: 2016-08-04

      can i get these Short Angled Highway Pegs in gloss black?

      My New FLHTCU 2015 is blacked out with 13500 worth of Harley factory accessories, I was wondering if I would need the longer ones as i am 6'4" tall ?
      Asked by: Peabs46
      Hello Peabs46, You would most likely want the Short mounts. The part number for the black kit is PN 50500168. Thank You!
      Answered by: JD34
      Date published: 2015-06-02

      Clamp doesn't close all the way

      When I install these on my 2014 Ultra Limited the clamp does not close all the way around the engine guard. There is probably a 1/4" to 1/2" open gap and the washer is free to move and jiggle around in that gap. This doesn't seem right to me but the clamp is tightened as far as I can tighten it by hand. The clamp is secure, but it bothers me that it isn't closed and the washer isn't secured. I'm afraid if it was tightened anymore that it would dent the engine guard. Is this normal or do I just need to tighten the screw with a power drill to close the gap or will this dent the engine guard?
      Asked by: MeAndMyHarley
      Here is a picture. You can see the black washer that is loose since the clamp doesn't close completely. The engine guard is the stock engine guard.
      Answered by: MeAndMyHarley
      Date published: 2015-02-18
      • y_2018, m_2, d_26, h_20CST
      • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasquestionsanswers, tq_4
      • loc_en_US, sid_PA-07-5083007, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Recently Viewed

        Please Hold Your Iron Horses

        You’ve been sitting idle, so your session will expire in

        Would you like to remain signed in and continue shopping?

        Yes, keep me signed in No, sign me out
        Item(s) Were Added to Your Cart
        Checkout Now
        Continue Shopping