Sportster Drag Bar

    Part Number 55800035A


    Finish / Color: Satin Black




    A A A

    Nothing says minimalist like a classically simple drag bar.

    • Shaped to give the Nightster™ or Iron 883™ model an aggressive riding profile
    • 1" Drag Bar features 0" of rise and 4" of pull back to provide an excellent combination of forward positioning and wrist comfort
    • Satin black finish
    • See Guides tab for additional components required for installation


    • Material Content

      Stainless steel
    • Material Diameter

      1.0 Inch
    • Tip-to-Tip

      29.38 Inch
    • Base Width

      9.0 Inch
    • Knurl Center-to-Center

      8.75 Inch
    • Rise

      0.0 Inch
    • Pullback

      4.0 Inch
    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Handlebar, washer and screw
    • Sold Separately

      Additional installation components


    A A A

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model

    More Info

    A A A


      Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.


      Sportster Drag Bar is rated 3.5 out of 5 by 4.
      Rated 5 out of 5 by from This Drag Bar Makes Your Bike Look Outstanding From a stock handlebar of 2015 Harley Davidson Iron XL883N to this product (drag bar) - made a big difference on overall look of my bike. Love this.. No additional wires or whatsoever extension needed. Highly recommend this product to IRON XL883N.
      Date published: 2018-01-27
      Rated 4 out of 5 by from Nice Bars These bars look nice but are tricky to fit, took a couple of hours taking it slowly. The brake line has quite bend in it and touches against the top yoke where the pinch bolt sits with a sharp edge. Harley quote was £500 ($770) for shorter replacement brake line!!! The whole thing is one unit so you can't just replace the top line on its own. If you add in shorter clutch cable and throttle/idle cables then the price jumps to about £800 ($1200). No-one pays that the change their handle bars so I just accepted the longer cables which look OK but not perfect. The bars do make the bike look cool though.
      Date published: 2015-07-27
      Rated 1 out of 5 by from Disappointed First, they are not a perfect fit, you have to lower your forks for the handlebars to sit all the way down. Second, you have to relocate your turn signals from the top triple tree to the lower one, so you have to buy a replacement pair of signals from HD that don't have the locking notch in the back. So you will need some sort of bike lift for sure to install handlebars properly.
      Date published: 2015-04-09
      Rated 4 out of 5 by from doesn't quite clear the fork caps on the forty eight Great looking bars, great feel BUT they don't quite clear the fork caps on the forty eight so i had to loosen the pinch bolts on the triple tree and raise it up on the forks by about 16th of an inch. so all in all good product just a little more of a pain than i had hoped.
      Date published: 2013-11-21
      • y_2018, m_2, d_26, h_20
      • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_4
      • loc_en_US, sid_PA-09-55800035, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Q & A

      do I need to relocate turn signals with a 2017 Sportster 48? Want turn signals on bars or just under bars high on the forks

      Asked by: cujo17

      Is this original stock handle bar?

      Will it work with 2013 HD Sportster 48? Do I need to buy any other accessories to make it work with 2013 Sportster 48 model?
      Asked by: Manish

      Cable Dimple

      Does these drag bars have the cable dimples indent?
      Asked by: NeilTT
      Hey NeilTT, Yes, these drag bars do have the dimple for the cables. Thanks for your question! Rockstar883
      Answered by: Rockstar883
      Date published: 2017-06-28

      2014 iron 883 drag bar fitment

      I have a 2015 iron 883 and I've been looking into the drag bars that are offered. Will the drag bars not work with the stock cables and lines since they aren't extreme lengths like a zed bar or apes?
      Asked by: jamesalter
      Hello Jamesalter, The stock cables and lines will not work with these bars. Please click on the "More Info" tab on the online store for the chart of which items are required and the Part Numbers. Thank you!
      Answered by: JD34
      Date published: 2015-02-23

      Will these bars work on 2015 forty eight?

      I was told at the dealer they will double checking..
      Asked by: Rjluna82
      Hey Rjluna82, The fitment of this handlebar has been updated to fit XL1200X models. The updated fitment for XL1200X models requires separate purchase of Riser Spacer Kit P/N 55900074 and Turn Signal Relocation Kit P/N 67800489 or 67800452. All models require separate purchase of additional components. Check out the full fitment in the "Fitment Tab".
      Answered by: Wisco832
      Date published: 2015-04-13
      • y_2018, m_2, d_26, h_20CST
      • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
      • cp_1, bvpage1
      • co_hasquestionsanswers, tq_11
      • loc_en_US, sid_PA-09-55800035, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_harleydavidson

      Recently Viewed

        Please Hold Your Iron Horses

        You’ve been sitting idle, so your session will expire in

        Would you like to remain signed in and continue shopping?

        Yes, keep me signed in No, sign me out
        Item(s) Were Added to Your Cart
        Checkout Now
        Continue Shopping