• Free Shipping with $50 Purchase + Free Returns – Learn More

    Visor Style Headlamp Trim Ring

    Part Number 67700216


    Finish / Color: Chrome




    A A A

    This chrome-plated Visor Style Trim Ring recesses the headlamp into the housing, and adds a traditional "eyebrow" design to the headlamp shell.

    • Headlamp trim ring
    • Recesses the headlamp into the housing, and adds a traditional "eyebrow" design to the headlamp shell
    • Stretches the profile of the bike for a long, lean appearance
    • Add matching Visor-Style Passing Lamp and Turn Signal Trim Rings for a T custom look


    • Warranty

      1 year limited warranty – Go to for full details
    • Sold in Unit

    • In The Box

      Trim Ring only


    A A A

    Fits ’14-later Electra Glide®, Street Glide®, Ultra Limited™ and Tri Glide™ models and ’94-later Road King® models

    Bike not listed?
    Select your year and model to see all the parts that fit your bike.

    • SELECT
    • Model


    Visor Style Headlamp Trim Ring is rated 2.4 out of 5 by 31.
    Rated 1 out of 5 by from Poor fitting I spent ages taking this on and off, thinking that I was doing something stupid. It just does not fit. I had a trim ring on my Roadking and that fitted fine. This one for my 17 FLHXS is rubbish. Like everyone else has said, it leaves a gap. I wish I had read the reviews before I bought it......
    Date published: 2018-02-04
    Rated 1 out of 5 by from Not what I expected from Harley !!!! Spent several hundred dollars on a Daymaker, and bought this ring to accent it, and never thought I'd regret buying Genuine Harley. Whoever engineered this and approved this thing should be ashamed. This ring doesn't replace the original instead it's just an overlay. After struggling to get the ring to seat in place and start the screw and nut, the fit and finish is less than acceptable for me. The split in the ring leaves a 1/4" gap at the bottom and absolutely will not close. I could almost live with that, but the gaping 3/8" space between the ring and the headlamp is just a trap for bugs, water, and dirt. I would have rather paid more for a ring that replaced the original and had the gasket that sealed around the headlamp bezel like the the factory ring does. I was told that Harley reads these reviews, well I hope so. C'mon guys help us out here.
    Date published: 2017-12-29
    Rated 2 out of 5 by from Good idea. Terrible engineering. I won't go so far to say that Harley should fire whoever designed this, but I am not sure how this part could meet their expectations from a Q/A perspective. I'm pretty sure the problem is that it isn't designed to fit over the OEM trim ring. I know that's how you install it, sure... but it's as if it wasn't designed with that in mind, hence why we have this 1/4" gap at the bottom that literally every review on here talks about. Harley - Add about a 1/4" diameter to this so it's able to tighten down flush, and you're set. Also, make sure where it fits up to itself at the bottom is centered. It's slightly off to the left in reality. Even bump the price up 5 bucks for all I care, and I'd still buy it to have a nice, finished look. In conclusion, I've bought plenty of Harley parts for my new Road King, and everything has been great. I've genuinely felt that most of the time... buying an HD part is getting me a little bump in quality over the competitors, even if the cost is double (or more...). But this thing. Wow. I might live with it for a while, because it doesn't look awful or anything (hence the 'fair' rating I'm giving it). Also, the visor rings for the auxiliary lights that Harley sells are PERFECT. Seriously, Harley - just rise to that level of quality for the main headlamp and it'll be a home run.
    Date published: 2017-11-26
    Rated 2 out of 5 by from Better Quality Expected I purchased this and the two for the smaller lights. The two smaller lights look great. This ring was not of good quality. The seam did not match up when tightened. I read this in the reviews and thought now way, but it's real.. They have an issue here that needs to be looked at..
    Date published: 2017-05-15
    • y_2018, m_2, d_26, h_20
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_31
    • loc_en_US, sid_PA-04-67700216, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Q & A


    Has the gap issue been fixe where the ring comes together?
    Asked by: rjfunk
    Hi Rjfunk, We apologize for any inconvenience this part may have cause. Harley-Davidson is aware of the the issue and determine to provide quality parts to our customers. Thanks for the feedback!
    Answered by: RowdyGrl79
    Date published: 2016-09-13

    Do you have to remove the fairing cover to install this ring?

    I had one of these rings on my 06 Road King Classic and there had to be room above the headlight to slide it on. There is no such room on my 14 Ultra Limited. The only way I see this being installed is if the fairing cover is removed and the ring added.
    Asked by: Troy1667
    Hi Troy, I installed the trim on the headlamp without removing the fairing on my 2014 FLHTCU. I'd be surprised if there were any fairing design differences on your Limited. I will say I recall it was difficult to fit the visor trim ring around the existing trim but clearance against the fairing wasn't the issue. Also, in my experience, make sure that you loosen the existing trim ring enough to accomodate the thickness of the new trim ring so the new one sits comfortably tight. I had to remove the new trim once to losen the existing a little more and that was very difficult due to sharp edges of the new trim ring. I hope this helps and good luck to you.
    Answered by: SKIHOG
    Date published: 2014-06-07
    • y_2018, m_2, d_26, h_20CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_2
    • loc_en_US, sid_PA-04-67700216, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_harleydavidson

    Recently Viewed

      Please Hold Your Iron Horses

      You’ve been sitting idle, so your session will expire in

      Would you like to remain signed in and continue shopping?

      Yes, keep me signed in No, sign me out
      Item(s) Were Added to Your Cart
      Checkout Now
      Continue Shopping